EPM7128AETC144-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 98MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128AETC144-10N Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.A TQFP package contains the item.The device is programmed with 100 I/O ports.There is a 144terminations set on devices.This electrical part is wired with a terminal position of QUAD.The power source is powered by 3.3Vvolts.It belongs to the family [0].The chip is programmed with 144 pins.When using this device, YESis also available.2500gates are devices that serve as building blocks for digital circuits.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.This electronic part is mounted in the way of Surface Mount.A total of 144pins are provided on this board.A maximum voltage of 3.6Vis required for operation.The device is designed to operate with a minimal supply voltage of 3VV.A total of 36programmable I/Os are available.You can achieve 98MHzfrequencies.It is recommended that the operating temperature exceed 0°C.A temperature lower than 70°Cis recommended for operation.The logic block consists of 8 l logic blocks (LABs).There should be a lower maximum frequency than 192.3MHz.A programmable logic type can be categorized as EE PLD.
EPM7128AETC144-10N Features
TQFP package
100 I/Os
144 pin count
144 pins
8 logic blocks (LABs)
EPM7128AETC144-10N Applications
There are a lot of Altera EPM7128AETC144-10N CPLDs applications.
- POWER-SAVING MODES
- I2C BUS INTERFACE
- Power up sequencing
- Custom state machines
- White goods (Washing, Cold, Aircon ,...)
- Programmable polarity
- Digital multiplexers
- LED Lighting systems
- Software-Driven Hardware Configuration
- Synchronous or asynchronous mode
