EPM7128AETC144-5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 192.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128AETC144-5N Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is embedded in the TQFP package.This device has 100 I/O ports programmed into it.It is programmed to terminate devices at [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 3.3V is used to power it.There is a part in the family [0].There are 144pins on the chip.This device is also capable of displaying [0].For digital circuits, there are 2500gates. These devices serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].Surface Mountmounts this electronic component.It is designed with 144 pins.It operates at a maximum supply voltage of 3.6V volts.With a minimal supply voltage of [0], it operates.A total of 36 Programmable I/Os are available.This frequency can be achieved at 192.3MHz.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.The logic block consists of 8 l logic blocks (LABs).The maximum frequency should not exceed 192.3MHz.It is possible to classify programmable logic as EE PLD.
EPM7128AETC144-5N Features
TQFP package
100 I/Os
144 pin count
144 pins
8 logic blocks (LABs)
EPM7128AETC144-5N Applications
There are a lot of Altera EPM7128AETC144-5N CPLDs applications.
- Auxiliary Power Supply Isolated and Non-isolated
- Multiple Clock Source Selection
- Cross-Matrix Switch
- POWER-SAVING MODES
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Configurable Addressing of I/O Boards
- I/O PORTS (MCU MODULE)
- Complex programmable logic devices
- Reset swapping
- Software Configuration of Add-In Boards
