EPM7128AETC144-7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | MATTE TIN (472) OVER COPPER |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7128 |
| JESD-30 Code | S-PQFP-G144 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 100 |
| Clock Frequency | 129.9MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
EPM7128AETC144-7N Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is embedded in the 144-LQFP package.As you can see, this device has 100 I/O ports programmed into it.The termination of a device is set to [0].QUADis the terminal position of this electrical part.A voltage of 3.3V is used as the power supply for this device.There is a part in the family [0].Trayshould be used to package the chip.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.The MAX? 7000Aseries FPGA is one of these types.If you use this device, you will also find [0].The EPM7128indicates that related parts can be found.2500gates are used to construct digital circuits.This logic element/block contains 8logic elements.It runs on 2.5/3.33.3Vvolts of power.In this case, the maximum supply voltage (Vsup) is 3.6V.A supply voltage (Vsup) of greater than 3V should be used.A frequency of 129.9MHzshould not be exceeded by its clock.
EPM7128AETC144-7N Features
144-LQFP package
100 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM7128AETC144-7N Applications
There are a lot of Intel EPM7128AETC144-7N CPLDs applications.
- Complex programmable logic devices
- Programmable polarity
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- ON-CHIP OSCILLATOR CIRCUIT
- Bootloaders for FPGAs
- Address decoding
- PLC analog input modules
- POWER-SAVING MODES
- Reset swapping
