EPM7128AETI100-7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7128 |
| JESD-30 Code | S-PQFP-G100 |
| Number of Outputs | 84 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 129.9MHz |
| Propagation Delay | 7.5 ns |
| Architecture | PLA-TYPE |
| Number of Inputs | 84 |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7128AETI100-7N Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].The device is programmed with 84 I/Os.100terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 3.3V.This part is part of the family [0].Trayshould be used to package the chip.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.Mount the chip by Surface Mount.This type of FPGA is a part of the MAX? 7000A series.According to the EPM7128, its related parts can be found.It is possible to construct digital circuits using 2500gates, which are devices that serve as building blocks.There are a total of 8 logic elements or blocks.The system runs on a power supply of 2.5/3.33.3V watts.The maximal supply voltage (Vsup) reaches 3.6V.Vsup (supply voltage) must be greater than 3V.The clock frequency of this device should not exceed 129.9MHz.This device is configured with a 84 output.The inputs employed are 84.
EPM7128AETI100-7N Features
100-TQFP package
84 I/Os
The operating temperature of -40°C~85°C TA
2.5/3.33.3V power supplies
84 outputs
EPM7128AETI100-7N Applications
There are a lot of Intel EPM7128AETI100-7N CPLDs applications.
- State machine control
- Software Configuration of Add-In Boards
- Power automation
- I/O PORTS (MCU MODULE)
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- USB Bus
- POWER-SAVING MODES
- Handheld digital devices
- Protection relays
- I2C BUS INTERFACE
