EPM7128AETI144-7
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
EPM7128AETI144-7 Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.TQFPis the package in which it resides.As you can see, this device has 100 I/O ports programmed into it.There are 144 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 3.3V is used as the power supply for this device.There is a part included in Programmable Logic Devices.Bulkshould be used for packaging the chip.There are 144 pins on the chip.The device can also be used to find [0].For digital circuits, there are 2500gates. These devices serve as building blocks.High efficiency requires a voltage supply of [0].EEPROM is adopted for storing data.The electronic part is mounted by Surface Mount.The device has a pinout of [0].A maximum voltage of 3.6Vis required for operation.Normally, it operates with a voltage of 3VV as its minimum supply voltage.Currently, there are 36 Programmable I/Os available.This frequency can be achieved at 166.67MHz.The operating temperature should be higher than -40°C.There should be a temperature below 85°Cat the time of operation.There are 8 logic blocks (LABs) in its basic building block.It should be below 192.3MHzat the maximal frequency.There are several types of programmable logic that can be categorized as EE PLD.
EPM7128AETI144-7 Features
TQFP package
100 I/Os
144 pin count
144 pins
8 logic blocks (LABs)
EPM7128AETI144-7 Applications
There are a lot of Altera EPM7128AETI144-7 CPLDs applications.
- Reset swapping
- Digital systems
- Boolean function generators
- STANDARD SERIAL INTERFACE UART
- Programmable polarity
- Discrete logic functions
- ON-CHIP OSCILLATOR CIRCUIT
- INTERRUPT SYSTEM
- Address decoding
- ToR/Aggregation/Core Switch and Router
