EPM7128BTC100-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 333.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 4 ns |
| Frequency (Max) | 243.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128BTC100-4 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a TQFP package.There are 84 I/Os on the board.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Its terminal position is QUAD.It is powered by a voltage of 2.5V volts.This part is included in Programmable Logic Devices.It is programmed with 100 pins.It is also characterized by YES.A digital circuit is built using 2500gates.In this case, EEPROMwill be used to store the data.This electronic part is mounted in the way of Surface Mount.The pins are [0].A maximum voltage of 3.6Vis required for operation.The minimal supply voltage is 3V.A total of 84programmable I/Os are available.The frequency that can be achieved is 333.33MHz.In order to operate, the temperature should be higher than 0°C.Temperatures should be lower than 70°C when operating.The program consists of 8 logic blocks (LABs).There should be a lower maximum frequency than 243.9MHz.It is possible to classify programmable logic as EE PLD.
EPM7128BTC100-4 Features
TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128BTC100-4 Applications
There are a lot of Altera EPM7128BTC100-4 CPLDs applications.
- Custom shift registers
- ON-CHIP OSCILLATOR CIRCUIT
- Dedicated input registers
- White goods (Washing, Cold, Aircon ,...)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Programmable polarity
- Portable digital devices
- DMA control
- ToR/Aggregation/Core Switch and Router
- Address decoders
