Parameters |
Number of Terminations |
100 |
ECCN Code |
3A991 |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
YES |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Frequency |
333.33MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
100 |
Operating Supply Voltage |
2.5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
2.625V |
Min Supply Voltage |
2.375V |
Number of I/O |
84 |
Memory Type |
EEPROM |
Propagation Delay |
4 ns |
Turn On Delay Time |
4 ns |
Frequency (Max) |
243.9MHz |
Programmable Logic Type |
EE PLD |
Number of Gates |
2500 |
Number of Programmable I/O |
84 |
Number of Logic Blocks (LABs) |
8 |
Speed Grade |
4 |
Output Function |
MACROCELL |
Number of Macro Cells |
128 |
JTAG BST |
YES |
In-System Programmable |
YES |
Height |
1mm |
Length |
14mm |
Width |
14mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
100 |
Published |
1998 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
EPM7128BTC100-4N Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The item is packaged with TQFP.The device has 84inputs and outputs.There is a 100terminations set on devices.This electrical part is wired with a terminal position of QUAD.It is powered from a supply voltage of 2.5V.The part belongs to Programmable Logic Devices family.It has 100pins programmed.This device is also capable of displaying [0].2500gates are used to construct digital circuits.The supply voltage should be maintained at 2.5V for high efficiency.Data is stored using [0].The electronic component is mounted by Surface Mount.There are 100pins on it.There is a maximum supply voltage of 2.625Vwhen the device is operating.It is powered by 2.375Vas its minimum supply voltage.A total of 84Programmable I/Os are present.This frequency is 333.33MHz.Ideally, the operating temperature should be greater than 0°C.Temperatures should not exceed 70°C.The program consists of 8 logic blocks (LABs).It is recommended that the maximal frequency be lower than 243.9MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7128BTC100-4N Features
TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128BTC100-4N Applications
There are a lot of Altera EPM7128BTC100-4N CPLDs applications.
- I2C BUS INTERFACE
- Portable digital devices
- Wide Vin Industrial low power SMPS
- Digital systems
- Address decoding
- Configurable Addressing of I/O Boards
- Protection relays
- D/T registers and latches
- Power Meter SMPS
- Pattern recognition