EPM7128BTC144-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Frequency (Max) | 243.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128BTC144-7 Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).In the TQFPpackage, you will find it.There are 100 I/Os on the board.The device is programmed with 144 terminations.This electrical component has a terminal position of 0.It is powered from a supply voltage of 2.5V.There is a part included in Programmable Logic Devices.The chip is programmed with 144 pins.It is also possible to find YESwhen using this device.2500gates are devices that serve as building blocks for digital circuits.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.It is recommended to store data in [0].Surface Mountmounts this electronic component.It is designed with 144 pins.It operates at a maximum supply voltage of 3.6V volts.Despite its minimal supply voltage of [0], it is capable of operating.Programmable I/Os are counted up 36.It is possible to achieve a frequency of 166.67MHz.In order to operate, the temperature should be higher than 0°C.Ideally, the operating temperature should be below 70°C.Its basic building block is composed of 8 logic blocks (LABs).Maximum frequency should be less than 243.9MHz.This kind of FPGA is composed of EE PLD.
EPM7128BTC144-7 Features
TQFP package
100 I/Os
144 pin count
144 pins
8 logic blocks (LABs)
EPM7128BTC144-7 Applications
There are a lot of Altera EPM7128BTC144-7 CPLDs applications.
- Page register
- Digital designs
- Wide Vin Industrial low power SMPS
- Custom state machines
- Storage Cards and Storage Racks
- Software-Driven Hardware Configuration
- Cross-Matrix Switch
- Parity generators
- I/O PORTS (MCU MODULE)
- I2C BUS INTERFACE
