EPM7128ELC84-10P
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 84-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 84 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | EE PLD |
| Number of I/O | 68 |
| Clock Frequency | 125MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 8 |
| Length | 29.3116mm |
| Width | 29.3116mm |
| RoHS Status | Non-RoHS Compliant |
EPM7128ELC84-10P Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 84-LCC (J-Lead) package.There are 68 I/Os on the board.It is programmed that device terminations will be 84 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 5V.It is included in Programmable Logic Devices.Package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Mount the chip by Surface Mount.The MAX? 7000series FPGA is one of these types.The 2500gates serve as building blocks for digital circuits.A logic element or block has 8elements.There is 3.3/55V power supply available for it.Supply voltage (Vsup) reaches a maximum of 5.25V.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.clock frequency should not exceed [0].
EPM7128ELC84-10P Features
84-LCC (J-Lead) package
68 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7128ELC84-10P Applications
There are a lot of Intel EPM7128ELC84-10P CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Multiple Clock Source Selection
- ROM patching
- PLC analog input modules
- TIMERS/COUNTERS
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- LED Lighting systems
- Digital multiplexers
- Cross-Matrix Switch
- Power Meter SMPS
