EPM7128ELC84-20
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 84 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 84 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 20 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height | 3.81mm |
| Length | 29.31mm |
| Width | 29.31mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128ELC84-20 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is packaged with PLCC.As you can see, this device has 68 I/O ports programmed into it.84terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 5V is used as the power supply for this device.There is a part included in Programmable Logic Devices.84pins are programmed on the chip.It is possible to construct digital circuits using 2500gates, which are devices that serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].In order to store data, EEPROMis used.In this case, Surface Mountis used to mount the electronic component.The pins are [0].A voltage of 5.25V is the maximum supply voltage for this device.The minimal supply voltage is 4.75V.A total of 68programmable I/Os are available.It is possible to achieve a frequency of 83.33MHz.Operating temperatures should be higher than 0°C.It is recommended to keep the operating temperature below 70°C.In total, it contains 8 logic blocks (LABs).There should be a lower maximum frequency than 125MHz.A programmable logic type is classified as EE PLD.
EPM7128ELC84-20 Features
PLCC package
68 I/Os
84 pin count
84 pins
8 logic blocks (LABs)
EPM7128ELC84-20 Applications
There are a lot of Altera EPM7128ELC84-20 CPLDs applications.
- Preset swapping
- ToR/Aggregation/Core Switch and Router
- Power up sequencing
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- DMA control
- Reset swapping
- Bootloaders for FPGAs
- Portable digital devices
- Voltage level translation
- STANDARD SERIAL INTERFACE UART
