EPM7128EQC100-12
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7128EQC100-12 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a PQFP package.It is equipped with 84I/O ports.The device is programmed with 100 terminations.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 5V voltage supply for this device.It is included in Programmable Logic Devices.It is programmed with 100 pins.The device can also be used to find [0].A digital circuit is built using 2500gates.High efficiency requires a voltage supply of [0].Data is stored using [0].The electronic component is mounted by Surface Mount.It is designed with 100 pins.It operates at a maximum supply voltage of 5.25V volts.In order for it to operate, a supply voltage of 4.75Vis required.There are 84 Programmable I/Os.This can be achieved at a frequency of 125MHz.It is recommended that the operating temperature exceed 0°C.Ideally, the operating temperature should be below 70°C.It is composed of 8 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.A programmable logic type can be categorized as EE PLD.
EPM7128EQC100-12 Features
PQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128EQC100-12 Applications
There are a lot of Altera EPM7128EQC100-12 CPLDs applications.
- I2C BUS INTERFACE
- Dedicated input registers
- Portable digital devices
- Parity generators
- Handheld digital devices
- Custom shift registers
- Storage Cards and Storage Racks
- Complex programmable logic devices
- Interface bridging
- Auxiliary Power Supply Isolated and Non-isolated
