EPM7128EQC160-10
| Parameters | |
|---|---|
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 160 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 4.07mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
EPM7128EQC160-10 Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is enclosed in a PQFP package.It is programmed with 100 I/Os.160terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered by a voltage of 5V volts.It belongs to the family [0].160pins are programmed on the chip.Additionally, this device is capable of displaying [0].As a building block for digital circuits, there are 2500gates.The supply voltage should be maintained at 5V for high efficiency.Data storage is performed using [0].It is mounted by Surface Mount.The device has a pinout of [0].A maximum supply voltage of 5.25Vis used in its operation.A minimum supply voltage of 4.75V is required for it to operate.There are 100 Programmable I/Os.This frequency is 125MHz.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.There are 8logic blocks (LABs) that make up its basic building block.There should be a lower maximum frequency than 125MHz.A programmable logic type can be categorized as EE PLD.
EPM7128EQC160-10 Features
PQFP package
100 I/Os
160 pin count
160 pins
8 logic blocks (LABs)
EPM7128EQC160-10 Applications
There are a lot of Altera EPM7128EQC160-10 CPLDs applications.
- Digital systems
- Boolean function generators
- DMA control
- Storage Cards and Storage Racks
- Multiple Clock Source Selection
- Interface bridging
- Power up sequencing
- Configurable Addressing of I/O Boards
- Battery operated portable devices
- ROM patching
