EPM7128SLC84-15N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 84 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN (472) OVER COPPER |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 84 |
| Number of Outputs | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Max Junction Temperature (Tj) | 90°C |
| Ambient Temperature Range High | 70°C |
| In-System Programmable | YES |
| Height | 4.572mm |
| Length | 29.31mm |
| Width | 29.31mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128SLC84-15N Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).A PLCC package contains the item.In this case, there are 68 I/Os programmed.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power supply voltage is 5V.The part belongs to Programmable Logic Devices family.With 84pins programmed, the chip is ready to use.If this device is used, you will also be able to find [0].A digital circuit can be constructed using 2500gates.High efficiency requires a voltage supply of [0].It is adopted to store data in [0].Surface Mountis the mounting point of this electronic part.There are 84 pins embedded in the device.There is a maximum supply voltage of 5.25Vwhen the device is operating.In order for it to operate, a supply voltage of 4.75Vis required.A total of 68programmable I/Os are available.You can achieve 100MHzfrequencies.In order to operate properly, the operating temperature should be higher than 0°C.Temperatures should be lower than 70°C when operating.It consists of 8 logic blocks (LABs).It is recommended that the maximal frequency be lower than 147.1MHz.There is a type of programmable logic called EE PLD.This device is configured to output [0].
EPM7128SLC84-15N Features
PLCC package
68 I/Os
84 pin count
84 pins
8 logic blocks (LABs)
100 outputs
EPM7128SLC84-15N Applications
There are a lot of Altera EPM7128SLC84-15N CPLDs applications.
- Page register
- Timing control
- Multiple Clock Source Selection
- I/O PORTS (MCU MODULE)
- Address decoders
- Portable digital devices
- Boolean function generators
- Power automation
- Power Meter SMPS
- Complex programmable logic devices
