EPM7128SLC84-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 84 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Frequency | 147.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 84 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 29.3116mm |
| Width | 29.3116mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128SLC84-7N Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the PLCC package.This device has 100 I/O ports programmed into it.There is a 84terminations set on devices.There is a QUADterminal position on the electrical part in question.Power is provided by a supply voltage of 5V volts.There is a part in the family [0].A chip with 84pins is programmed.This device also displays [0].2500gates are devices that serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.The electronic component is mounted by Surface Mount.There are 84pins on it.It operates with the maximal supply voltage of 5.25V.It is powered by 4.75Vas its minimum supply voltage.A programmable I/O count of 68 has been recorded.This frequency is 147.1MHz.It is recommended that the operating temperature exceeds 0°C.Temperatures should not exceed 70°C.8logic blocks (LABs) make up this circuit.It is recommended that the maximal frequency be less than 0.Programmable logic types can be divided into EE PLD.
EPM7128SLC84-7N Features
PLCC package
100 I/Os
84 pin count
84 pins
8 logic blocks (LABs)
EPM7128SLC84-7N Applications
There are a lot of Altera EPM7128SLC84-7N CPLDs applications.
- Digital multiplexers
- High speed graphics processing
- Code converters
- Address decoding
- D/T registers and latches
- Voltage level translation
- Reset swapping
- Programmable polarity
- Multiple Clock Source Selection
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
