EPM7128SQC100-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128SQC100-10 Overview
128macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.There is a PQFP package containing it.As you can see, this device has 84 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.It is powered from a supply voltage of 5V.It is included in Programmable Logic Devices.Ideally, the chip should be packaged by Bulk.Chips are programmed with 100 pins.This device can also display [0].In digital circuits, 2500gates serve as building blocks.High efficiency requires the supply voltage to be maintained at [0].It is recommended to store data in [0].The electronic component is mounted by Surface Mount.There are 100 pins on the device.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.With a minimal supply voltage of [0], it operates.A total of 84 Programmable I/Os are available.You can achieve 125MHzfrequencies.The operating temperature should be higher than 0°C.A temperature lower than 70°Cis recommended for operation.The program consists of 8 logic blocks (LABs).The maximal frequency should be lower than 147.1MHz.Programmable logic types can be divided into EE PLD.
EPM7128SQC100-10 Features
PQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128SQC100-10 Applications
There are a lot of Altera EPM7128SQC100-10 CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Software-Driven Hardware Configuration
- Bootloaders for FPGAs
- Custom shift registers
- Field programmable gate
- Wide Vin Industrial low power SMPS
- TIMERS/COUNTERS
- Programmable power management
- Custom state machines
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
