EPM7128SQC100-10FN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 125MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7128SQC100-10FN Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the 100-BQFP package.This device has 84 I/O ports programmed into it.There are 100 terminations programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 5Vprovides power to the device.As a result, it is packaged as Tray.Ensure its reliability by operating at [0].It is recommended that Surface Mountholds the chip in place.In FPGA terms, it is a type of MAX? 7000Sseries FPGA.A digital circuit is built using 2500gates.There are 8 logic elements/blocks.Initially, the maximum supply voltage (Vsup) is 5.25V.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.It is recommended that the clock frequency not exceed 125MHz.
EPM7128SQC100-10FN Features
100-BQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
EPM7128SQC100-10FN Applications
There are a lot of Intel EPM7128SQC100-10FN CPLDs applications.
- Programmable polarity
- Battery operated portable devices
- Custom shift registers
- Storage Cards and Storage Racks
- Protection relays
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Discrete logic functions
- DDC INTERFACE
- Random logic replacement
- Timing control
