EPM7128SQC100-15N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Max Junction Temperature (Tj) | 90°C |
| Ambient Temperature Range High | 70°C |
| In-System Programmable | YES |
| Height | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128SQC100-15N Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a PQFP package.There are 84 I/Os on the board.100terminations have been programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is supplied by a voltage of 5V volts.It is a part of the family [0].There are 100 pins on the chip.If you use this device, you will also find [0].In digital circuits, there are 2500gates, which act as a basic building block.The supply voltage should be maintained at 5V for high efficiency.EEPROM is adopted for storing data.Surface Mountmounts this electronic component.The device is designed with pins [0].It operates with the maximal supply voltage of 5.25V.Despite its minimal supply voltage of [0], it is capable of operating.A programmable I/O count of 84 has been recorded.You can achieve 100MHzfrequencies.There should be a temperature above 0°Cat the time of operation.It is recommended that the operating temperature be lower than 70°C.It consists of 8 logic blocks (LABs).It is recommended that the maximum frequency is less than 0.It is possible to classify programmable logic as EE PLD.
EPM7128SQC100-15N Features
PQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128SQC100-15N Applications
There are a lot of Altera EPM7128SQC100-15N CPLDs applications.
- I/O expansion
- Complex programmable logic devices
- Code converters
- Software-driven hardware configuration
- PLC analog input modules
- ROM patching
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Dedicated input registers
- Parity generators
- I/O PORTS (MCU MODULE)
