EPM7128SQC100-7F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128SQC100-7F Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is packaged with PQFP.It is programmed with 84 I/Os.There are 100 terminations programmed into the device.There is a QUADterminal position on the electrical part in question.It is powered by a voltage of 5V volts.It belongs to the family [0].It is recommended that the chip be packaged by Bulk.It has 100pins programmed.This device can also display [0].A digital circuit is built using 2500gates.In this case, EEPROMwill be used to store the data.Surface Mountmounts this electronic component.100pins are included in its design.There is a maximum supply voltage of 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.It runs on 3.3/55Vvolts of power.There are 84 programmable I/Os in this system.The frequency that can be achieved is 166.7MHz.In order to operate, the temperature should be higher than 0°C.The operating temperature should be lower than 70°C.The program consists of 8 logic blocks (LABs).Maximum frequency should be less than 147.1MHz.It is possible to classify programmable logic as EE PLD.
EPM7128SQC100-7F Features
PQFP package
84 I/Os
100 pin count
100 pins
3.3/55V power supplies
8 logic blocks (LABs)
EPM7128SQC100-7F Applications
There are a lot of Altera EPM7128SQC100-7F CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Address decoders
- DDC INTERFACE
- Portable digital devices
- Boolean function generators
- Address decoding
- INTERRUPT SYSTEM
- USB Bus
- Multiple DIP Switch Replacement
- Battery operated portable devices
