EPM7128SQC100-7F
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7128 |
| JESD-30 Code | R-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 166.7MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7128SQC100-7F Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.100-BQFPis the package in which it resides.There are 84 I/Os on the board.100terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 5V is used to power it.It belongs to the family [0].It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Chips should be mounted by Surface Mount.It is a type of FPGA belonging to the MAX? 7000S series.The device can also be used to find [0].The EPM7128indicates that related parts can be found.As a building block for digital circuits, there are 2500gates.A total of 8logic elements/blocks are present.A total of 3.3/55V power supplies are needed to run it.In this case, the maximum supply voltage (Vsup) reaches 5.25V.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.It is recommended that the clock frequency not exceed 166.7MHz.
EPM7128SQC100-7F Features
100-BQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7128SQC100-7F Applications
There are a lot of Intel EPM7128SQC100-7F CPLDs applications.
- USB Bus
- Multiple DIP Switch Replacement
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- DDC INTERFACE
- I/O expansion
- Programmable power management
- Pattern recognition
- Field programmable gate
- Software Configuration of Add-In Boards
- POWER-SAVING MODES
