EPM7128SQC160-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.07mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128SQC160-10 Overview
In the mobile phone network, there are 128macro cells, which are cells with high-power antennas and towers.It is contained in package [0].There are 100 I/Os on the board.There are 160 terminations programmed into the device.This electrical component has a terminal position of 0.Power is supplied by a voltage of 5V volts.This part is included in Programmable Logic Devices.There are 160pins on the chip.This device also displays [0].A digital circuit is built using 2500gates.High efficiency requires the supply voltage to be maintained at [0].It is adopted to store data in [0].Surface Mountis the mounting point of this electronic part.There are 160pins on it.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.A minimum supply voltage of 4.75V is required for this device to operate.There are 100 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is possible to achieve a frequency of 125MHz.There should be a temperature above 0°Cat the time of operation.Ideally, the operating temperature should be below 70°C.In total, it contains 8 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.There is a type of programmable logic called EE PLD.
EPM7128SQC160-10 Features
PQFP package
100 I/Os
160 pin count
160 pins
8 logic blocks (LABs)
EPM7128SQC160-10 Applications
There are a lot of Altera EPM7128SQC160-10 CPLDs applications.
- Digital multiplexers
- Address decoders
- Timing control
- Interface bridging
- Code converters
- Wide Vin Industrial low power SMPS
- Cross-Matrix Switch
- Discrete logic functions
- State machine design
- Boolean function generators
