EPM7128SQI100-10
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | EPM7128 |
| JESD-30 Code | R-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 125MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7128SQI100-10 Overview
In the mobile phone network, there are 128macro cells, which are cells with high-power antennas and towers.In the 100-BQFPpackage, you will find it.The device is programmed with 84 I/Os.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.Power is provided by a supply voltage of 5V volts.It is a part of family [0].It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the MAX? 7000S series.This device is also capable of displaying [0].Its related parts can be found in the [0].In digital circuits, there are 2500gates, which act as a basic building block.There are a total of 8 logic elements or blocks.This device runs on 3.3/55Vvolts of electricity.There is a maximum supply voltage (Vsup) of 5.5V.Voltage supply (Vsup) should be higher than 4.5V.It is recommended that the clock frequency not exceed 125MHz.
EPM7128SQI100-10 Features
100-BQFP package
84 I/Os
The operating temperature of -40°C~85°C TA
3.3/55V power supplies
EPM7128SQI100-10 Applications
There are a lot of Intel EPM7128SQI100-10 CPLDs applications.
- DDC INTERFACE
- Pattern recognition
- Storage Cards and Storage Racks
- Digital multiplexers
- I/O PORTS (MCU MODULE)
- Software-Driven Hardware Configuration
- USB Bus
- Reset swapping
- ROM patching
- Power Meter SMPS
