EPM7128SQI100-10N
| Parameters | |
|---|---|
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 2.7mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
EPM7128SQI100-10N Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].In this case, there are 84 I/Os programmed.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of QUAD.It is powered from a supply voltage of 5V.There is a part included in Programmable Logic Devices.It is equipped with 100 pin count.If you use this device, you will also find [0].In digital circuits, 2500gates serve as building blocks.The supply voltage should be maintained at 5V for high efficiency.In order to store data, EEPROMis used.Surface Mountis the mounting point of this electronic part.There are 100 pins embedded in the device.A maximum voltage of 5.5Vis required for operation.The minimal supply voltage is 4.5V.There is a maximum frequency of 125MHz.It is recommended that the operating temperature be higher than -40°C.A temperature below 85°Cshould be used as the operating temperature.There are 8logic blocks (LABs) that make up its basic building block.It is recommended that the maximal frequency be lower than 147.1MHz.There are several types of programmable logic that can be categorized as EE PLD.
EPM7128SQI100-10N Features
PQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128SQI100-10N Applications
There are a lot of Altera EPM7128SQI100-10N CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Pattern recognition
- I/O PORTS (MCU MODULE)
- Software-Driven Hardware Configuration
- State machine control
- Discrete logic functions
- Software Configuration of Add-In Boards
- Random logic replacement
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Address decoders
