EPM7128SQI160-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.07mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128SQI160-10 Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a PQFP package containing it.As a result, it has 100 I/O ports programmed.There are 160 terminations programmed into the device.There is a QUADterminal position on the electrical part in question.It is powered by a voltage of 5V volts.It is included in Programmable Logic Devices.Chips are programmed with 160 pins.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vcan also be found.2500gates are devices that serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.This device is mounted by Surface Mount.A total of 160pins are provided on this board.It operates at a maximum supply voltage of 5.5V volts.It is powered by 4.5Vas its minimum supply voltage.A programmable I/O count of 100 has been recorded.This frequency is 125MHz.It is recommended that the operating temperature exceed -40°C.It is recommended to keep the operating temperature below 85°C.In its simplest form, it consists of 8 logic blocks (LABs).The maximum frequency should not exceed 147.1MHz.There are several types of programmable logic that can be categorized as EE PLD.
EPM7128SQI160-10 Features
PQFP package
100 I/Os
160 pin count
160 pins
8 logic blocks (LABs)
EPM7128SQI160-10 Applications
There are a lot of Altera EPM7128SQI160-10 CPLDs applications.
- Programmable polarity
- State machine control
- Storage Cards and Storage Racks
- Battery operated portable devices
- Software-driven hardware configuration
- Voltage level translation
- Digital systems
- Protection relays
- Cross-Matrix Switch
- I/O PORTS (MCU MODULE)
