EPM7128STC100-10F
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
EPM7128STC100-10F Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).TQFPis the package in which it resides.In this case, there are 84 I/Os programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Its terminal position is QUAD.There is 5V voltage supply for this device.There is a part included in Programmable Logic Devices.Ideally, the chip should be packaged by Bulk.Chips are programmed with 100 pins.The device can also be used to find [0].In digital circuits, 2500gates serve as building blocks.Data storage is performed using [0].Surface Mountmounts this electronic component.There are 100 pins embedded in the device.There is a maximum supply voltage of 3.6Vwhen the device is operating.A minimum supply voltage of 3V is required for this device to operate.A power supply of 3.3/55Vvolts is required to operate this device.A total of 84programmable I/Os are available.A frequency of 125MHzcan be achieved.Operating temperatures should be higher than 0°C.Temperatures should not exceed 70°C.It consists of 8 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7128STC100-10F Features
TQFP package
84 I/Os
100 pin count
100 pins
3.3/55V power supplies
8 logic blocks (LABs)
EPM7128STC100-10F Applications
There are a lot of Altera EPM7128STC100-10F CPLDs applications.
- USB Bus
- Handheld digital devices
- Digital multiplexers
- DDC INTERFACE
- Interface bridging
- State machine design
- Boolean function generators
- Portable digital devices
- Wide Vin Industrial low power SMPS
- Storage Cards and Storage Racks
