EPM7128STC100-15N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | MAX® 7000S |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7128 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 100MHz |
| Propagation Delay | 15 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7128STC100-15N Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 100-TQFP package containing it.The device is programmed with 84 I/Os.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Its terminal position is QUAD.There is 5V voltage supply for this device.It is a part of family [0].Ideally, the chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Mount the chip by Surface Mount.This type of FPGA is a part of the MAX? 7000S series.If you use this device, you will also find [0].The EPM7128indicates that its related parts can be found.2500gates are used to construct digital circuits.This logic element/block contains 8logic elements.A power supply of 3.3/55Vvolts is required to operate this device.5.25Vis the maximum supply voltage (Vsup).There should be a higher supply voltage (Vsup) than 4.75V.Ideally, its clock frequency should not exceed 100MHz.
EPM7128STC100-15N Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7128STC100-15N Applications
There are a lot of Intel EPM7128STC100-15N CPLDs applications.
- Programmable polarity
- D/T registers and latches
- Digital designs
- Software-driven hardware configuration
- Boolean function generators
- Interface bridging
- Power up sequencing
- Complex programmable logic devices
- Discrete logic functions
- Software-Driven Hardware Configuration
