EPM7128STC100-6
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128STC100-6 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.There is a TQFP package containing it.In this case, there are 84 I/Os programmed.There is a 100terminations set on devices.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.Power is supplied by a voltage of 5V volts.There is a part in the family [0].100pins are programmed on the chip.This device can also display [0].As a building block for digital circuits, there are 2500gates.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.It is recommended that data be stored in [0].This electronic part is mounted in the way of Surface Mount.The device is designed with pins [0].There is a maximum supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.A programmable I/O count of 84 has been recorded.There can be 166.7MHz frequency achieved.In order to operate properly, the operating temperature should be higher than 0°C.Ideally, the operating temperature should be below 70°C.In total, it contains 8 logic blocks (LABs).It is recommended that the maximum frequency be less than 147.1MHz.A programmable logic type can be categorized as EE PLD.
EPM7128STC100-6 Features
TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128STC100-6 Applications
There are a lot of Altera EPM7128STC100-6 CPLDs applications.
- Parity generators
- I/O PORTS (MCU MODULE)
- Battery operated portable devices
- Boolean function generators
- INTERRUPT SYSTEM
- State machine control
- DDC INTERFACE
- Discrete logic functions
- Software-driven hardware configuration
- PULSE WIDTH MODULATION (PWM)
