EPM7128STC100-6N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7128STC100-6N Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.A TQFP package contains the item.The device is programmed with 84 I/Os.The termination of a device is set to [0].QUADis the terminal position of this electrical part.The power supply voltage is 5V.The part belongs to Programmable Logic Devices family.With 100pins programmed, the chip is ready to use.This device can also display [0].2500gates are used to construct digital circuits.For storing data, it is recommended to use [0].Surface Mountis the mounting point of this electronic part.This board has 100 pins.A maximum supply voltage of 3.6Vis used in its operation.It operates with the minimal supply voltage of 3V.There is 3.3/55V power supply available for it.In total, there are 84programmable I/Os.There can be 166.7MHz frequency achieved.Operating temperatures should be higher than 0°C.The operating temperature should be lower than 70°C.There are 8 logic blocks (LABs) in its basic building block.Maximum frequency should be less than 147.1MHz.Programmable logic types are divided into EE PLD.
EPM7128STC100-6N Features
TQFP package
84 I/Os
100 pin count
100 pins
3.3/55V power supplies
8 logic blocks (LABs)
EPM7128STC100-6N Applications
There are a lot of Altera EPM7128STC100-6N CPLDs applications.
- Address decoders
- INTERRUPT SYSTEM
- Software-Driven Hardware Configuration
- Battery operated portable devices
- ON-CHIP OSCILLATOR CIRCUIT
- Portable digital devices
- Synchronous or asynchronous mode
- Programmable power management
- Auxiliary Power Supply Isolated and Non-isolated
- D/T registers and latches
