EPM7128STC100-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128STC100-7 Overview
In the mobile phone network, there are 128macro cells, which are cells with high-power antennas and towers.The item is enclosed in a TQFP package.The device has 84inputs and outputs.There is a 100terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 5V is used to power it.The part belongs to Programmable Logic Devices family.Chips are programmed with 100 pins.It is also possible to find CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vwhen using this device.It is possible to construct digital circuits using 2500gates, which are devices that serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].The electronic part is mounted by Surface Mount.This board has 100 pins.A voltage of 5.25V is the maximum supply voltage for this device.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.Programmable I/Os are counted up 84.This can be achieved at a frequency of 166.7MHz.It is recommended that the operating temperature exceeds 0°C.A temperature below 70°Cshould be used as the operating temperature.There are 8 logic blocks (LABs) in its basic building block.The maximum frequency should not exceed 147.1MHz.Types of programmable logic are divided into EE PLD.
EPM7128STC100-7 Features
TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128STC100-7 Applications
There are a lot of Altera EPM7128STC100-7 CPLDs applications.
- Wide Vin Industrial low power SMPS
- ToR/Aggregation/Core Switch and Router
- Pattern recognition
- INTERRUPT SYSTEM
- Multiple Clock Source Selection
- Protection relays
- Boolean function generators
- Power up sequencing
- White goods (Washing, Cold, Aircon ,...)
- Random logic replacement
