EPM7128STC100-7N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7128 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 166.7MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7128STC100-7N Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the 100-TQFP package.There are 84 I/Os programmed in it.100terminations have been programmed into the device.The terminal position of this electrical component is QUAD.An electrical supply voltage of 5V is used to power it.This part is part of the family [0].As a result, it is packaged as Tray.To ensure reliability, the device operates at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.It is a type of FPGA belonging to the MAX? 7000S series.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vcan also be found.The EPM7128indicates that related parts can be found.For digital circuits, there are 2500gates. These devices serve as building blocks.This logic block consists of 8logic elements.In order for the device to operate, it requires 3.3/55V power supplies.5.25Vrepresents the maximal supply voltage (Vsup).If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.It is recommended that the clock frequency not exceed 166.7MHz.
EPM7128STC100-7N Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7128STC100-7N Applications
There are a lot of Intel EPM7128STC100-7N CPLDs applications.
- Software-Driven Hardware Configuration
- Parity generators
- Custom state machines
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Timing control
- Address decoders
- Voltage level translation
- Pattern recognition
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- PULSE WIDTH MODULATION (PWM)
