EPM7128STI100-10
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7128 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 125MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7128STI100-10 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.You can find it in package [0].There are 84 I/Os programmed in it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 5V.This part is included in Programmable Logic Devices.Trayis the packaging method.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.It is mounted in the way of Surface Mount.In terms of FPGAs, it belongs to the MAX? 7000S series.If this device is used, you will also be able to find [0].You can find its related parts in the [0].2500gates are used to construct digital circuits.A total of 8logic elements/blocks are present.It runs on 3.3/55Vvolts of power.Supply voltage (Vsup) reaches a maximum of 5.5V.There should be a higher supply voltage (Vsup) than 4.5V.Its clock frequency should not exceed 125MHz.
EPM7128STI100-10 Features
100-TQFP package
84 I/Os
The operating temperature of -40°C~85°C TA
3.3/55V power supplies
EPM7128STI100-10 Applications
There are a lot of Intel EPM7128STI100-10 CPLDs applications.
- Discrete logic functions
- Wide Vin Industrial low power SMPS
- Cross-Matrix Switch
- State machine design
- Synchronous or asynchronous mode
- Multiple DIP Switch Replacement
- Digital systems
- Software Configuration of Add-In Boards
- Configurable Addressing of I/O Boards
- Multiple Clock Source Selection
