EPM7160ELC84-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 84 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 84 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 100MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 64 |
| Number of Logic Blocks (LABs) | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 5.08mm |
| Length | 29.3116mm |
| Width | 29.3116mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7160ELC84-10 Overview
There are 160 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the PLCCpackage, you will find it.It is programmed with 64 I/Os.84terminations are programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 5Vprovides power to the device.It is a part of family [0].It is programmed with 84 pins.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vis also available.3200gates are used to construct digital circuits.High efficiency requires the supply voltage to be maintained at [0].For storing data, it is recommended to use [0].This electronic part is mounted in the way of Surface Mount.The 84pins are designed into the board.There is a maximum supply voltage of 5.25Vwhen the device is operating.With a minimal supply voltage of [0], it operates.There are 64 Programmable I/Os.There can be 125MHz frequency achieved.In order to operate, the temperature should be higher than 0°C.A temperature less than 70°Cshould be used for operation.10logic blocks (LABs) make up this circuit.If the maximal frequency is less than [0], it should be lower than that.This kind of FPGA is composed of EE PLD.
EPM7160ELC84-10 Features
PLCC package
64 I/Os
84 pin count
84 pins
10 logic blocks (LABs)
EPM7160ELC84-10 Applications
There are a lot of Altera EPM7160ELC84-10 CPLDs applications.
- Software-driven hardware configuration
- State machine design
- Voltage level translation
- High speed graphics processing
- POWER-SAVING MODES
- Software-Driven Hardware Configuration
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Power up sequencing
- Auxiliary Power Supply Isolated and Non-isolated
