EPM7160EQC100-10
| Parameters | |
|---|---|
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 100MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
EPM7160EQC100-10 Overview
This network has 160macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with PQFP.As a result, it has 84 I/O ports programmed.It is programmed to terminate devices at [0].Its terminal position is QUAD.Power is supplied by a voltage of 5V volts.There is a part in the family [0].With 100pins programmed, the chip is ready to use.The device can also be used to find [0].For digital circuits, there are 3200gates. These devices serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].This electronic part is mounted in the way of Surface Mount.The 100pins are designed into the board.A maximum voltage of 5.25Vis required for operation.With a minimal supply voltage of [0], it operates.In total, there are 84programmable I/Os.There is 125MHz frequency that can be achieved.Operating temperatures should be higher than 0°C.Temperatures should be lower than 70°C when operating.There are 10 logic blocks (LABs) in its basic building block.There should be a lower maximum frequency than 100MHz.A programmable logic type is categorized as EE PLD.
EPM7160EQC100-10 Features
PQFP package
84 I/Os
100 pin count
100 pins
10 logic blocks (LABs)
EPM7160EQC100-10 Applications
There are a lot of Altera EPM7160EQC100-10 CPLDs applications.
- I/O expansion
- Battery operated portable devices
- Reset swapping
- Wide Vin Industrial low power SMPS
- Programmable polarity
- D/T registers and latches
- Random logic replacement
- I2C BUS INTERFACE
- ToR/Aggregation/Core Switch and Router
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
