EPM7160EQC100-12
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Frequency (Max) | 100MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 10 |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7160EQC100-12 Overview
In the mobile phone network, there are 160macro cells, which are cells with high-power antennas and towers.It is part of the PQFP package.It is equipped with 84I/O ports.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Its terminal position is QUAD.There is 5V voltage supply for this device.This part is in the family [0].There are 100pins on the chip.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vcan also be found.3200gates are used to construct digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].For storing data, it is recommended to use [0].Surface Mountis used to mount this electronic component.The 100pins are designed into the board.There is a maximum supply voltage of 5.25Vwhen the device is operating.With a minimal supply voltage of [0], it operates.Currently, there are 84 Programmable I/Os available.The frequency that can be achieved is 125MHz.It is recommended that the operating temperature exceed 0°C.Ideally, the operating temperature should be below 70°C.The system consists of 10 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.This kind of FPGA is composed of EE PLD.
EPM7160EQC100-12 Features
PQFP package
84 I/Os
100 pin count
100 pins
10 logic blocks (LABs)
EPM7160EQC100-12 Applications
There are a lot of Altera EPM7160EQC100-12 CPLDs applications.
- Power automation
- ROM patching
- Page register
- Digital systems
- Battery operated portable devices
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Custom shift registers
- PULSE WIDTH MODULATION (PWM)
- I/O expansion
- Boolean function generators
