EPM7160EQC160-20
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 83.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 160 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 104 |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 20 ns |
| Frequency (Max) | 100MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 104 |
| Number of Logic Blocks (LABs) | 10 |
| Speed Grade | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 4.07mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
EPM7160EQC160-20 Overview
There are 160 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the PQFPpackage, you will find it.This device has 104 I/O ports programmed into it.It is programmed that device terminations will be 160 .The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.It has 160pins programmed.It is also characterized by CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V.As a building block for digital circuits, there are 3200gates.The supply voltage should be maintained at 5V for high efficiency.In this case, EEPROMwill be used to store the data.Surface Mountis used to mount this electronic component.The device is designed with pins [0].In this case, the maximum supply voltage is 5.25V.With a minimal supply voltage of [0], it operates.Programmable I/Os are counted up 104.There is 83.33MHz frequency that can be achieved.There should be a temperature above 0°Cat the time of operation.There should be a temperature below 70°Cat the time of operation.There are 10logic blocks (LABs) that make up its basic building block.The maximal frequency should be lower than 100MHz.There is a type of programmable logic called EE PLD.
EPM7160EQC160-20 Features
PQFP package
104 I/Os
160 pin count
160 pins
10 logic blocks (LABs)
EPM7160EQC160-20 Applications
There are a lot of Altera EPM7160EQC160-20 CPLDs applications.
- Configurable Addressing of I/O Boards
- Portable digital devices
- State machine control
- Page register
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Power automation
- Custom shift registers
- POWER-SAVING MODES
- Preset swapping
- I/O PORTS (MCU MODULE)
