EPM7160SLC84-10N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Published | 1998 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 84 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin/Copper (Sn/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 84 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 149.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 64 |
| Number of Logic Blocks (LABs) | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 3.81mm |
| Length | 29.31mm |
| Width | 29.31mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7160SLC84-10N Overview
A mobile phone network consists of 160macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).A PLCC package contains the item.The device is programmed with 64 I/Os.It is programmed that device terminations will be 84 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 5V.There is a part in the family [0].There are 84 pins on the chip.The device can also be used to find [0].For digital circuits, there are 3200gates. These devices serve as building blocks.High efficiency requires the supply voltage to be maintained at [0].In order to store data, EEPROMis used.Surface Mountmounts this electronic component.In this case, the maximum supply voltage is 5.25V.Despite its minimal supply voltage of [0], it is capable of operating.Currently, there are 64 Programmable I/Os available.The frequency that can be achieved is 125MHz.In order to operate properly, the operating temperature should be higher than 0°C.A temperature lower than 70°Cis recommended for operation.The logic block consists of 10 l logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.Programmable logic types are divided into EE PLD.
EPM7160SLC84-10N Features
PLCC package
64 I/Os
84 pin count
10 logic blocks (LABs)
EPM7160SLC84-10N Applications
There are a lot of Altera EPM7160SLC84-10N CPLDs applications.
- Synchronous or asynchronous mode
- Parity generators
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Interface bridging
- Digital multiplexers
- Preset swapping
- TIMERS/COUNTERS
- Wide Vin Industrial low power SMPS
- Digital systems
- I/O expansion
