EPM7160SLC84-7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 84-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 84 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7160 |
| JESD-30 Code | S-PQCC-J84 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 166.7MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 3200 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 10 |
| Height Seated (Max) | 5.08mm |
| Length | 29.3116mm |
| Width | 29.3116mm |
| RoHS Status | Non-RoHS Compliant |
EPM7160SLC84-7 Overview
There are 160 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a 84-LCC (J-Lead) package.As you can see, this device has 64 I/O ports programmed into it.There is a 84terminations set on devices.There is a QUADterminal position on the electrical part in question.It is powered by a voltage of 5V volts.The part is included in Programmable Logic Devices.As a result, it is packaged as Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended to mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the MAX? 7000S series.It is also possible to find CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vwhen using this device.EPM7160contains its related parts.As a building block for digital circuits, there are 3200gates.There are 10 logic elements/blocks.In order for the device to operate, it requires 3.3/55V power supplies.5.25Vis the maximum supply voltage (Vsup).Ensure that the supply voltage (Vsup) exceeds 4.75V.The clock frequency of the device should not exceed 166.7MHz.
EPM7160SLC84-7 Features
84-LCC (J-Lead) package
64 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7160SLC84-7 Applications
There are a lot of Intel EPM7160SLC84-7 CPLDs applications.
- Software Configuration of Add-In Boards
- Timing control
- LED Lighting systems
- Programmable polarity
- USB Bus
- Software-Driven Hardware Configuration
- Digital systems
- Synchronous or asynchronous mode
- ON-CHIP OSCILLATOR CIRCUIT
- Address decoders
