EPM7160STC100-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 149.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7160STC100-10 Overview
The mobile phone network has 160 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].As a result, it has 84 I/O ports programmed.100terminations are programmed into the device.The terminal position of this electrical component is QUAD.Power is provided by a supply voltage of 5V volts.There is a part in the family [0].It is packaged in the way of Bulk.There are 100 pins on the chip.For digital circuits, there are 3200gates. These devices serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].EEPROM is adopted for storing data.Surface Mountis the mounting point of this electronic part.The 100pins are designed into the board.This device operates at a voltage of 5.25Vas its maximum supply voltage.It operates with the minimal supply voltage of 4.75V.Programmable I/Os are counted up 84.You can achieve 125MHzfrequencies.It is recommended that the operating temperature be higher than 0°C.There should be a temperature below 70°Cat the time of operation.The program consists of 10 logic blocks (LABs).Maximum frequency should be less than 149.3MHz.A programmable logic type can be categorized as EE PLD.
EPM7160STC100-10 Features
TQFP package
84 I/Os
100 pin count
100 pins
10 logic blocks (LABs)
EPM7160STC100-10 Applications
There are a lot of Altera EPM7160STC100-10 CPLDs applications.
- TIMERS/COUNTERS
- State machine control
- Protection relays
- Random logic replacement
- STANDARD SERIAL INTERFACE UART
- Power Meter SMPS
- Digital multiplexers
- I/O expansion
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Dedicated input registers
