Parameters |
Mount |
Surface Mount |
Package / Case |
TQFP |
Packaging |
Bulk |
Published |
1998 |
JESD-609 Code |
e0 |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
100 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
5.25V |
Power Supplies |
3.3/55V |
Temperature Grade |
COMMERCIAL |
Supply Voltage-Min (Vsup) |
4.75V |
Number of I/O |
84 |
Clock Frequency |
125MHz |
Programmable Logic Type |
EE PLD |
Number of Gates |
3200 |
Number of Logic Blocks (LABs) |
10 |
Output Function |
MACROCELL |
Number of Macro Cells |
160 |
JTAG BST |
YES |
In-System Programmable |
YES |
Height Seated (Max) |
1.27mm |
Length |
14mm |
Width |
14mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
EPM7160STC100-10F Overview
There are 160 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is packaged with TQFP.There are 84 I/Os on the board.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a QUADterminal position on the electrical part in question.There is 5V voltage supply for this device.There is a part included in Programmable Logic Devices.Bulkshould be used to package the chip.A chip with 100pins is programmed.It is possible to construct digital circuits using 3200gates, which are devices that serve as building blocks.Surface Mountis used to mount this electronic component.A power supply of 3.3/55Vvolts is required to operate this device.There is a maximum supply voltage (Vsup) of 5.25V.It is recommended that the operating temperature exceed 0°C.There should be a temperature below 70°Cat the time of operation.The system consists of 10 logic blocks (LABs).There should be a higher supply voltage (Vsup) than 4.75V.clock frequency should not exceed [0].Programmable logic types can be divided into EE PLD.
EPM7160STC100-10F Features
TQFP package
84 I/Os
100 pin count
3.3/55V power supplies
10 logic blocks (LABs)
EPM7160STC100-10F Applications
There are a lot of Altera EPM7160STC100-10F CPLDs applications.
- Custom state machines
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- TIMERS/COUNTERS
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Software-driven hardware configuration
- Synchronous or asynchronous mode
- Wide Vin Industrial low power SMPS
- Preset swapping
- ToR/Aggregation/Core Switch and Router