EPM7160STC100-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 149.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7160STC100-10N Overview
There are 160 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).TQFPis the package in which it resides.This device has 84 I/O ports programmed into it.100terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 5V is used as the power supply for this device.This part is included in Programmable Logic Devices.The chip is programmed with 100 pins.A digital circuit is built using 3200gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.The electronic part is mounted by Surface Mount.This board has 100 pins.It operates at a maximum supply voltage of 5.25V volts.It is powered by 4.75Vas its minimum supply voltage.There are a total of 84 Programmable I/Os.There is 125MHz frequency that can be achieved.It is recommended that the operating temperature be greater than 0°C.The operating temperature should be lower than 70°C.It consists of 10 logic blocks (LABs).There should be a lower maximum frequency than 149.3MHz.There are several types of programmable logic that can be categorized as EE PLD.
EPM7160STC100-10N Features
TQFP package
84 I/Os
100 pin count
100 pins
10 logic blocks (LABs)
EPM7160STC100-10N Applications
There are a lot of Altera EPM7160STC100-10N CPLDs applications.
- POWER-SAVING MODES
- Power automation
- TIMERS/COUNTERS
- Multiple DIP Switch Replacement
- Timing control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Preset swapping
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Address decoding
