EPM7160STC100-10N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7160 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 125MHz |
| Number of Gates | 3200 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 10 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7160STC100-10N Overview
There are 160 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 100-TQFPpackage, you will find it.The device is programmed with 84 I/Os.It is programmed to terminate devices at [0].Its terminal position is QUAD.Power is provided by a supply voltage of 5V volts.It is included in Programmable Logic Devices.It is recommended to package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].Ensure that the chip is mounted by Surface Mount.In this case, it is a type of FPGA belonging to the MAX? 7000S series.There are related parts in [0].3200gates are used to construct digital circuits.There are a total of 10 logic elements or blocks.There is 3.3/55V power supply available for it.In this case, the maximum supply voltage (Vsup) is 5.25V.It is important that the supply voltage (Vsup) exceeds 4.75VV.It is recommended that the clock frequency not exceed 125MHz.
EPM7160STC100-10N Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7160STC100-10N Applications
There are a lot of Intel EPM7160STC100-10N CPLDs applications.
- Dedicated input registers
- Custom shift registers
- Cross-Matrix Switch
- Address decoding
- ON-CHIP OSCILLATOR CIRCUIT
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- TIMERS/COUNTERS
- Portable digital devices
- Reset swapping
- Configurable Addressing of I/O Boards
