EPM7160STC100-6
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7160 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 166.7MHz |
| Propagation Delay | 6 ns |
| Number of Gates | 3200 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 6ns |
| Number of Logic Elements/Blocks | 10 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7160STC100-6 Overview
There are 160 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the 100-TQFP package.There are 84 I/Os programmed in it.There are 100 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 5V.This part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.Ensure its reliability by operating at [0].Ideally, the chip should be mounted by Surface Mount.The FPGA belongs to the MAX? 7000S series.The EPM7160indicates that related parts can be found.There are 3200 gates, which are devices that acts as a building block for digital circuits. 10logic elements/blocks exist.There is 3.3/55V power supply available for it.The maximal supply voltage (Vsup) reaches 5.25V.It is recommended that the supply voltage (Vsup) be greater than 4.75V.This device should not have an clock frequency greater than 166.7MHz.
EPM7160STC100-6 Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7160STC100-6 Applications
There are a lot of Intel EPM7160STC100-6 CPLDs applications.
- Field programmable gate
- Interface bridging
- Battery operated portable devices
- Custom state machines
- ROM patching
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- ON-CHIP OSCILLATOR CIRCUIT
- Protection relays
- ToR/Aggregation/Core Switch and Router
- Address decoders
