Parameters |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
100 |
Published |
1998 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Frequency |
166.7MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
100 |
Operating Supply Voltage |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Number of I/O |
84 |
Memory Type |
EEPROM |
Propagation Delay |
6 ns |
Turn On Delay Time |
6 ns |
Frequency (Max) |
149.3MHz |
Programmable Logic Type |
EE PLD |
Number of Gates |
3200 |
Number of Programmable I/O |
84 |
Number of Logic Blocks (LABs) |
10 |
Speed Grade |
6 |
Output Function |
MACROCELL |
Number of Macro Cells |
160 |
JTAG BST |
YES |
In-System Programmable |
YES |
Height Seated (Max) |
1.27mm |
Length |
14mm |
Width |
14mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
EPM7160STC100-6N Overview
In the mobile phone network, there are 160macro cells, which are cells with high-power antennas and towers.The product is contained in a TQFP package.The device has 84inputs and outputs.There are 100 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 5V volts.The part is included in Programmable Logic Devices.There are 100pins on the chip.In digital circuits, there are 3200gates, which act as a basic building block.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.A Surface Mountis mounted on this electronic component.It is designed with 100 pins.With a maximum supply voltage of [0], it operates.It is powered by 4.75Vas its minimum supply voltage.There are 84 Programmable I/Os.This frequency can be achieved at 166.7MHz.It is recommended that the operating temperature exceed 0°C.Ideally, the operating temperature should be below 70°C.It is composed of 10 logic blocks (LABs).There should be a lower maximum frequency than 149.3MHz.It is possible to classify programmable logic as EE PLD.
EPM7160STC100-6N Features
TQFP package
84 I/Os
100 pin count
100 pins
10 logic blocks (LABs)
EPM7160STC100-6N Applications
There are a lot of Altera EPM7160STC100-6N CPLDs applications.
- Pattern recognition
- Power automation
- DDC INTERFACE
- Field programmable gate
- Synchronous or asynchronous mode
- Cross-Matrix Switch
- Random logic replacement
- Software-Driven Hardware Configuration
- Multiple DIP Switch Replacement
- Software Configuration of Add-In Boards