banner_page

EPM7160STC100-7

0.5mm PMIC 100 Pin 166.7MHz 5V TQFP


  • Manufacturer: Altera
  • Nocochips NO: 2936-EPM7160STC100-7
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 362
  • Description: 0.5mm PMIC 100 Pin 166.7MHz 5V TQFP (Kg)

Details

Tags

Parameters
Pin Count 100
Qualification Status Not Qualified
Operating Supply Voltage 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Number of I/O 84
Memory Type EEPROM
Propagation Delay 7.5 ns
Frequency (Max) 149.3MHz
Programmable Logic Type EE PLD
Number of Gates 3200
Number of Programmable I/O 84
Number of Logic Blocks (LABs) 10
Output Function MACROCELL
Number of Macro Cells 160
JTAG BST YES
In-System Programmable YES
Height Seated (Max) 1.27mm
Length 14mm
Width 14mm
RoHS Status RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
Published 1998
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 100
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 235
Supply Voltage 5V
Terminal Pitch 0.5mm
Frequency 166.7MHz
Time@Peak Reflow Temperature-Max (s) 30

EPM7160STC100-7 Overview


In the mobile phone network, there are 160macro cells, which are cells with high-power antennas and towers.It is part of the TQFP package.As a result, it has 84 I/O ports programmed.There are 100 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.The power supply voltage is 5V.It belongs to the family [0].It is programmed with 100 pins.The 3200gates serve as building blocks for digital circuits.The supply voltage should be maintained at 5V for high efficiency.For data storage, EEPROMis adopted.In this case, it is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 5.25V when the maximum supply voltage is applied.With a minimal supply voltage of [0], it operates.There are 84 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. In this case, 166.7MHzis the frequency that can be achieved.In order to operate properly, the operating temperature should be higher than 0°C.A temperature lower than 70°Cis recommended for operation.In total, it contains 10 logic blocks (LABs).The maximal frequency should be lower than 149.3MHz.In programmable logic, a type of logic can be categorized as EE PLD.

EPM7160STC100-7 Features


TQFP package
84 I/Os
100 pin count
100 pins
10 logic blocks (LABs)

EPM7160STC100-7 Applications


There are a lot of Altera EPM7160STC100-7 CPLDs applications.

  • Digital designs
  • Software Configuration of Add-In Boards
  • I2C BUS INTERFACE
  • White goods (Washing, Cold, Aircon ,...)
  • I/O expansion
  • Multiple Clock Source Selection
  • Code converters
  • STANDARD SERIAL INTERFACE UART
  • Programmable polarity
  • Auxiliary Power Supply Isolated and Non-isolated

Write a review

Note: HTML is not translated!
    Bad           Good