EPM7160STC100-7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7160 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 166.7MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 3200 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 10 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7160STC100-7 Overview
There are 160 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].As a result, it has 84 I/O ports programmed.100terminations are programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 5V is used to power it.It is a part of the family [0].As a result, it is packaged as Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Ensure that the chip is mounted by Surface Mount.FPGAs belonging to the MAX? 7000Sseries contain this type of chip.Its related parts can be found in the [0].A digital circuit is built using 3200gates.In total, there are 10 logic elements/blocks.There is 3.3/55V power supply available for it.Supply voltage (Vsup) reaches a maximum of 5.25V.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.It should not exceed 166.7MHzin its clock frequency.
EPM7160STC100-7 Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7160STC100-7 Applications
There are a lot of Intel EPM7160STC100-7 CPLDs applications.
- Bootloaders for FPGAs
- Software Configuration of Add-In Boards
- Complex programmable logic devices
- Portable digital devices
- PULSE WIDTH MODULATION (PWM)
- D/T registers and latches
- ROM patching
- Dedicated input registers
- Preset swapping
- Configurable Addressing of I/O Boards
