EPM7192EGC160-15
| Parameters | |
|---|---|
| Mount | Surface Mount, Through Hole |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 160 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 124 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 90.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3750 |
| Number of Programmable I/O | 124 |
| Number of Logic Blocks (LABs) | 12 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 5.34mm |
| Length | 39.624mm |
| Width | 39.624mm |
| RoHS Status | RoHS Compliant |
EPM7192EGC160-15 Overview
192macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.In this case, there are 124 I/Os programmed.There is a 160terminations set on devices.This electrical part has a terminal position of PERPENDICULARand is connected to the ground.The power source is powered by 5Vvolts.It is included in Programmable Logic Devices.In this chip, the 160pins are programmed.If this device is used, you will also be able to find [0].It is possible to construct digital circuits using 3750gates, which are devices that serve as building blocks.For high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.This electronic part is mounted in the way of Surface Mount, Through Hole.The pins are [0].There is a maximum supply voltage of 5.25Vwhen the device is operating.The minimal supply voltage is 4.75V.A total of 124 Programmable I/Os are available.In this case, 100MHzis the frequency that can be achieved.Operating temperatures should be higher than 0°C.A temperature below 70°Cshould be used as the operating temperature.The program consists of 12 logic blocks (LABs).The maximum frequency should not exceed 90.9MHz.It is possible to classify programmable logic as EE PLD.
EPM7192EGC160-15 Features
124 I/Os
160 pin count
160 pins
12 logic blocks (LABs)
EPM7192EGC160-15 Applications
There are a lot of Altera EPM7192EGC160-15 CPLDs applications.
- White goods (Washing, Cold, Aircon ,...)
- Voltage level translation
- Discrete logic functions
- Dedicated input registers
- DDC INTERFACE
- Power up sequencing
- INTERRUPT SYSTEM
- Power automation
- Page register
- Multiple DIP Switch Replacement
