EPM7192EGC160-15
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 160-BPGA |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7192 |
| JESD-30 Code | S-CPGA-P160 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | EE PLD |
| Number of I/O | 124 |
| Clock Frequency | 100MHz |
| Propagation Delay | 15 ns |
| Number of Gates | 3750 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 12 |
| Height Seated (Max) | 5.34mm |
| Length | 39.624mm |
| Width | 39.624mm |
| RoHS Status | Non-RoHS Compliant |
EPM7192EGC160-15 Overview
There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 160-BPGApackage, you will find it.It is programmed with 124 I/Os.The device is programmed with 160 terminations.This electrical part has a terminal position of PERPENDICULARand is connected to the ground.It is powered from a supply voltage of 5V.The part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.A reliable operation is ensured by the operating temperature of [0].Ideally, the chip should be mounted by Surface Mount.The MAX? 7000series comprises this type of FPGA.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vcan also be found.Its related parts can be found in the [0].3750gates are used to construct digital circuits.This logic element/block contains 12logic elements.The system runs on a power supply of 3.3/55V watts.5.25Vis the maximum supply voltage (Vsup).If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.This device should not have an clock frequency greater than 100MHz.
EPM7192EGC160-15 Features
160-BPGA package
124 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7192EGC160-15 Applications
There are a lot of Intel EPM7192EGC160-15 CPLDs applications.
- Power automation
- Programmable polarity
- PLC analog input modules
- Battery operated portable devices
- Reset swapping
- Preset swapping
- STANDARD SERIAL INTERFACE UART
- Digital systems
- Boolean function generators
- I/O PORTS (MCU MODULE)
