EPM7192EGC160-20
| Parameters | |
|---|---|
| Mount | Surface Mount, Through Hole |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 83.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 124 |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 20 ns |
| Frequency (Max) | 90.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3750 |
| Number of Programmable I/O | 124 |
| Number of Logic Blocks (LABs) | 12 |
| Speed Grade | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height | 3.56mm |
| Length | 39.62mm |
| Width | 39.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7192EGC160-20 Overview
A mobile phone network consists of 192macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).This device has 124 I/O ports programmed into it.There is a 160terminations set on devices.This electrical part has a terminal position of PERPENDICULARand is connected to the ground.The device is powered by a voltage of 5V volts.It is included in Programmable Logic Devices.It is programmed with 160 pins.If you use this device, you will also find [0].For digital circuits, there are 3750gates. These devices serve as building blocks.The supply voltage should be maintained at 5V for high efficiency.For data storage, EEPROMis adopted.This device is mounted by Surface Mount, Through Hole.The device has a pinout of [0].There is a maximum supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.There are a total of 124 Programmable I/Os.The frequency that can be achieved is 83.33MHz.It is recommended that the operating temperature exceed 0°C.It is recommended that the operating temperature be lower than 70°C.Its basic building block is composed of 12 logic blocks (LABs).The maximum frequency should not exceed 90.9MHz.There is a type of programmable logic called EE PLD.
EPM7192EGC160-20 Features
124 I/Os
160 pin count
160 pins
12 logic blocks (LABs)
EPM7192EGC160-20 Applications
There are a lot of Altera EPM7192EGC160-20 CPLDs applications.
- Power up sequencing
- Programmable polarity
- Custom state machines
- Reset swapping
- INTERRUPT SYSTEM
- Configurable Addressing of I/O Boards
- Digital designs
- State machine design
- White goods (Washing, Cold, Aircon ,...)
- PULSE WIDTH MODULATION (PWM)
