EPM7192EQC160-12
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 124 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Frequency (Max) | 90.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3750 |
| Number of Programmable I/O | 124 |
| Number of Logic Blocks (LABs) | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 4.07mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7192EQC160-12 Overview
In the mobile phone network, there are 192macro cells, which are cells with high-power antennas and towers.In the PQFPpackage, you will find it.The device is programmed with 124 I/Os.There are 160 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.There is 5V voltage supply for this device.The part is included in Programmable Logic Devices.There are 160 pins on the chip.If you use this device, you will also find [0].The 3750gates serve as building blocks for digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].For data storage, EEPROMis adopted.The electronic component is mounted by Surface Mount.There are 160 pins on the device.It operates with the maximal supply voltage of 5.25V.A minimum supply voltage of 4.75V is required for this device to operate.There are 124 Programmable I/Os.There is a maximum frequency of 125MHz.Ideally, the operating temperature should be greater than 0°C.It is recommended that the operating temperature be below 70°C.The program consists of 12 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.Programmable logic types can be divided into EE PLD.
EPM7192EQC160-12 Features
PQFP package
124 I/Os
160 pin count
160 pins
12 logic blocks (LABs)
EPM7192EQC160-12 Applications
There are a lot of Altera EPM7192EQC160-12 CPLDs applications.
- Preset swapping
- Auxiliary Power Supply Isolated and Non-isolated
- Multiple Clock Source Selection
- Wide Vin Industrial low power SMPS
- Digital multiplexers
- Power automation
- Digital systems
- INTERRUPT SYSTEM
- Software-driven hardware configuration
- Programmable polarity
