EPM7192SQC160-7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7192 |
| JESD-30 Code | S-PQFP-G160 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 124 |
| Clock Frequency | 166.7MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 3750 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 12 |
| Height Seated (Max) | 4.07mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
EPM7192SQC160-7 Overview
There are 192 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is packaged with 160-BQFP.The device is programmed with 124 I/Os.It is programmed that device terminations will be 160 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.An electrical supply voltage of 5V is used to power it.It is a part of the family [0].It is packaged in the way of Tray.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the MAX? 7000S series.If you use this device, you will also find [0].The EPM7192shows its related parts.In digital circuits, there are 3750gates, which act as a basic building block.There are 12 logic elements or blocks present.A total of 3.3/55V power supplies are needed to run it.In this case, the maximum supply voltage (Vsup) reaches 5.25V.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.Its clock frequency should not exceed 166.7MHz.
EPM7192SQC160-7 Features
160-BQFP package
124 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7192SQC160-7 Applications
There are a lot of Intel EPM7192SQC160-7 CPLDs applications.
- Timing control
- D/T registers and latches
- Programmable power management
- Storage Cards and Storage Racks
- Random logic replacement
- TIMERS/COUNTERS
- USB Bus
- I2C BUS INTERFACE
- Software-driven hardware configuration
- Software-Driven Hardware Configuration
