EPM7192SQC160-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 124 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3750 |
| Number of Programmable I/O | 124 |
| Number of Logic Blocks (LABs) | 12 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
EPM7192SQC160-7N Overview
There are 192 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the PQFP package.This device has 124 I/O ports programmed into it.There is a 160terminations set on devices.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 5V voltage supply for this device.The part belongs to Programmable Logic Devices family.It is programmed with 160 pins.This device can also display [0].For digital circuits, there are 3750gates. These devices serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.There are 160pins on it.There is a maximum supply voltage of 5.25Vwhen the device is operating.It operates with the minimal supply voltage of 4.75V.In total, there are 124programmable I/Os.It is possible to achieve a frequency of 125MHz.It is recommended that the operating temperature be greater than 0°C.It is recommended that the operating temperature be lower than 70°C.It is composed of 12 logic blocks (LABs).A maximum frequency of less than 125MHzis recommended.There are several types of programmable logic that can be categorized as EE PLD.
EPM7192SQC160-7N Features
PQFP package
124 I/Os
160 pin count
160 pins
12 logic blocks (LABs)
EPM7192SQC160-7N Applications
There are a lot of Altera EPM7192SQC160-7N CPLDs applications.
- Storage Cards and Storage Racks
- Protection relays
- POWER-SAVING MODES
- Custom shift registers
- High speed graphics processing
- Power automation
- Software-driven hardware configuration
- Auxiliary Power Supply Isolated and Non-isolated
- TIMERS/COUNTERS
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
